1 Link/Ack LED indicator for each port 1 PoE Max LED indicator for each device 1 Power LED indicator for each device
Interfaces
8 x 10/100/1000 Base-T Ethernet ports (Data/Power) 2 x 100/1000 Base-X SFP ports
Port Lightning Protection
≥6KV
Forwarding mode
Store-and-forward
Switching capability
20 Gbps
Packet forwarding rate
14.9 Mpps
MAC address table
8K
PoE Power Supply
Ports 1 to 8 support 802.3af/at standard 1 2 4 5 +, 3 6 7 8 -
Input voltage
100-240V~ 50/60Hz
Dimensions(L*W*H)
294 mm * 179.6 mm * 44 mm
Whole Switch Power Consumption
Total power consumption: <150W Maximum PoE power output: 130W
Port features
Three modes controlled by hardware DIP switch: 1. Standard: In this mode, flow control is enabled for all ports to avoid network congestion and ensure stable network operation. 2. Flow Control Off: In this mode, flow control is disabled and no limit is set on data flow of all ports, used for scenarios with massive data flow of uploading and downloading. 3. VLAN: In this mode, ports 1 – 6 are isolated from each other, but all of them can communicate with ports 7, 8, SFP1 and SFP2, reducing broadcast storm.